Skip to content

8 years in business, insured installers. Free consultation: (281) 549-2758

(281) 549-2758
Installer on a step ladder smoothing clear window film onto a large living-room window overlooking a backyard, with a film roll and tools on a cart beside a sliding door

ServicesCeramic Window Film

Ceramic Window Film in Richmond, TX

Ceramic film cuts a big share of the sun's heat and blocks most UV without making your windows dark or shiny. We check your glass first, tell you straight whether ceramic is worth it, then install it cleanly inside your home or office.

What ceramic film does and when it makes sense

Ceramic window film uses tiny ceramic particles inside the film layers. They absorb and reject infrared heat, the part of sunlight you feel on your skin, while letting visible light through. There is no metal in it. That means no mirror look from the street, no rust or edge corrosion in humid weather, and no trouble with phone signal or Wi-Fi.

It is the right call for rooms that bake every afternoon, usually the west and south sides. It also fits people who want heat rejection but do not want dark or reflective glass. If your only problem is a little glare on a north window, a lighter, less costly film may do the job, and we will tell you that.

We look at what you already have before selling anything new. If old film is failing on two panes, we can often redo just those. If a dual-pane window looks foggy between the glass, the seal has failed. Film will not fix that, so we will say so before you spend money.

What the job includes

A check of your glass

We note the glass type on each window: single pane, dual pane, low-E or tempered. We also look at size and which way it faces. Some large dark-framed panes in full sun need a lighter film to avoid heat stress on the glass, and we plan for that.

Samples on your own windows

We stick sample pieces right on your glass. You see the shade in your own light, from inside and out, before you pick.

Old film removal

Purple, bubbling or peeling film comes off with steam and scrapers. We clean off the leftover glue so the new film lays flat.

Careful install

We lay drop cloths, move what needs moving and put it back. Film is cut to fit each pane with a small, even gap at the edges and squeegeed down tight.

Cleanup and care notes

We wipe down sills and haul off the scraps. You get simple instructions on curing time and how to clean the film later.

Window tint technician holds a fan of film samples against a living-room window as a homeowner looks on, with a ladder, film rolls and tools on drop cloths

Signs ceramic film could help

One room runs hot
The living room or a bedroom is several degrees warmer than the rest of the house by late afternoon. Closing the blinds helps, but then the room is dark.
The AC never catches up
Your system runs nonstop on summer afternoons and one side of the house still feels warm. Cutting heat at the glass takes load off the AC.
Fading floors and furniture
Wood floors, rugs or a couch near the window are lighter than they used to be. UV does most of that damage, and ceramic film blocks most of it.
Glare on screens
You squint at the TV or your monitor at certain times of day. Ceramic film cuts glare without the dark tint some people dislike.
Tired old film
Existing film has turned purple, bubbled or started to peel at the corners. That is cheap dyed film breaking down, and it is time to swap it.

How it goes, start to finish

  1. 1

    A phone call to start

    The consultation is free. Let us know where the sun gets in and what it is doing to the room, whether that is heat, glare, fading or a mix. From that we can tell you early on if ceramic film is likely worth a closer look.

  2. 2

    Measuring and a written quote

    Next we visit, measure every pane, note the glass type and stick up samples. The written quote breaks out each window along with the film we recommend for it.

  3. 3

    The day of the install

    Our insured installers do all the work from inside, moving through the house one room at a time. Window count and access set the pace, but most homes take a day or less.

  4. 4

    Curing and checking back

    For a few days the film may look slightly cloudy or have small spots of trapped water. Both fade as it cures, with nothing for you to do. If something still looks wrong after that, call us and we will stop by to check it.

What moves the price

Ceramic film costs more than standard dyed film because the material costs more to make. The final number depends on your windows and the job, not a flat rate. We go over every line on the quote so nothing surprises you.

Glass area and window count
Price follows square footage. A few big patio doors can cost more than many small windows.
Film grade
Ceramic films come in several grades with different heat rejection. We match the grade to how hot the room actually gets, not the top of the line by default.
Access
Tall stairwell windows, second-story glass and heavy furniture in the way add time and ladder work.
Old film removal
Stripping old film and glue is extra labor. Baked-on film that has been up for years takes longer to get off.
Glass type
Certain dual-pane or low-E windows may call for a specific film to keep the glass safe. That can shift which product we use.

Ceramic film questions

Will ceramic film make my rooms dark?
Not unless you want it to. Ceramic film comes in light shades that still reject a good amount of heat. Many customers pick a shade that is hard to notice from inside. The samples on your window show you exactly how it looks.
Does it mess with cell signal or Wi-Fi?
No. Ceramic film has no metal in it, so signals pass through the way they do now. That is one of the main reasons people choose it over metallic films.
Can you put it on dual-pane or low-E windows?
Usually, yes. We check the glass type, size and sun exposure first, because the wrong film on some panes can add heat stress. If a window is not a good fit for film, we tell you and leave it alone.
Is ceramic worth it over cheaper film?
For hot west and south rooms, often yes, since it handles heat better and does not fade to purple. For a shaded window with mild glare, a standard film may be all you need. We have been doing this for 8 years in business and will give you the honest answer for each room.
Do you install ceramic film at businesses too?
Yes. We put ceramic film on storefronts and offices where owners want heat and glare control without a mirror look. Ceramic film installed as part of a commercial window tinting job comes with our 15-year warranty on commercial window tinting. You can read more on our Commercial Window Tinting and Office Window Tinting pages.

Find out if ceramic film fits your windows

Tell us which rooms run hot or bright. We will give you a straight answer and a free quote, even if a simpler film is the better buy.